The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.
Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.
With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.
Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.
The SATDOCK2REU3 is b
acked by a 2-year StarTech.com warranty and free lifetime technical support.Connector(s) |
Drive Connectors | SATA Data & Power Combo (7+15 pin) |
Host Connectors | USB Type-B (9 pin) USB 3.0 |
Environmental |
Humidity | 5-90% |
Operating Temperature | 0ᄚC to 85ᄚC (32ᄚF to 185ᄚF) |
Storage Temperature | -10ᄚC to 95ᄚC (14ᄚF to 203ᄚF) |
Hardware |
Chipset ID | Prolific - PL2775 |
Compatible Drive Types | SATA |
Drive Installation | Removable |
Drive Size | 2.5in & 3.5in |
Fan(s) | No |
Interface | USB 3.0 |
Number of Drives | 2 |
Indicators |
LED Indicators | HDD1 / 75% |
| HDD2 / 100% |
| Link / 25% |
| Power / 50% |
Packaging Information |
Package Height | 13 cm [5.1 in] |
Package Length | 19.5 cm [7.7 in] |
Package Width | 16.5 cm [6.5 in] |
Shipping (Package) Weight | 885 g [31.2 oz] |
Performance |
Duplication Modes | Sector by Sector (Whole Drive) |
Duplication Speed | 11GBpm |
Erase Modes | 1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear) |
Max Drive Capacity | Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives |
Maximum Data Transfer Rate | 3Gbps |
Type and Rate | SATA II (3 Gbps) |
| USB 3.0 - 5 Gbit/s |
Physical Characteristics |
Product Height | 6.2 cm [2.4 in] |
Product Length | 12.8 cm [5 in] |
Product Width | 10.3 cm [4.1 in] |
Weight of Product | 424 g [15 oz] |
Power |
Center Tip Polarity | Positive |
Input Current | 1.2A |
Input Voltage | 100 - 240 AC |
Output Current | 3000mA |
Output Voltage | 12V DC |
Plug Type | M |
Power Consumption (In Watts) | 36 |
Power Source | AC Adapter Included |
Software |
OS Compatibility | OS independent; No software or drivers required |
Special Notes / Requirements |
Note | Destination drive must be the same size or larger than the source drive |
What's in the Box |
Included in Package | HDD Dock |
| Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand |
| USB 3.0 Cable |
| User Manual |