Intercoms

AXIS INDOOR COMPACT / VIEW SURFACE BOX

USE THIS MOUNTING BOX TO INSTALL THE AXIS IP STYLE INTO A WALL. THE FLUSH-MOUNTING BOX HAS A SPECIAL ELEVATING FUNCTION. IT HELPS YOU ALIGN THE INTERCOM WITH A WALL’S SURFACE SO THAT ONLY THE CORRECT PART OF THE INTERCOM SHOWS. IN OTHER WORDS A...

USE THE MOUNTING BACKPLATE TO INSTALL THE AXIS IP STYLE INTERCOM ON THE SURFACE OF A WALL. THE BOX INCLUDES A UNIQUE TILT-OUT MECHANISM WHICH GIVES YOU PLENTY OF ROOM TO WORK WITH CABLING.

The induction loop can only be used in versions of the IP Force intercom which are ready for use with an RFID reader 9151101RPW 9151101CRPW 9151101CHRPW 9151102RW 9151102CRW 9151102CHRW. If you use the induction loop you cannot put an RFID card reader...

IVSEC SMALL ADAPTOR BOX IV2444X or IV2455X NC110XA NC323XB NC317XA NC305XA

IVSEC POLE MOUNT BRACKET for IV2422X IV2455X IV2455X IV2477X and NC591XA

IVSEC PENDANT MOUNT FOR USE WITH IV2433X JUNCTION BOX

IVSEC LARGE ADAPTOR BOX FOR PENDANT IV2444X or WALL MOUNT IV2455X NC312XB NC512XA

IVSEC 90 DEGREE WALL MOUNT NEEDED WITH IV2433X or IV2466X ADAPTOR BOX

2N IP FORCE FRAME

With this glass mount you can easily mount the Axis IP Solo intercom on a glass surface. For complete installation of the intercom you will also need a backplate 9155068 which you will apply to the glass mount. You then install the intercom on the...

With the wedge backplate you can tilt the Axis IP Solo intercom by 25. It gives you more options to cover the area in front of the door. There are two basic scenarios when you can use the wedge backplate. In the first the intercom is on the same wall as...

Used in conjunction with the Axis Helios Verso Vario and Force IP-addressable Door Entry Systems when fitted with an internal or external Card Reader.The Axis Helios is a genuine and official Mifare RFID key fob that is compatible to use for Axis Helios...

The Plasterboard flush-mounting board is a durable open back frame used in conjunction with the Helios IP Force and the Helios IP Safety range. Secure flush mounting board Indoor mounting into plasterboard Accommodates 1 x Axis Force/Safety IP Intercom...

The backplate is wall-mounted and its angle 25 offers better visual coverage of the area in front of entry door. It is only suitable for surface installation of the double-module versions of the Axis IP Verso and Axis LTE Verso intercoms. The dimensions...

Surface mount installation box for mounting the 9155301CSNickel & 9155301CBSBlack Solo IP Intercom devices. For Axis Verso Solo Door Intercom 9155301CS & 9155301CBS Units Accepts 1 x Helios IP Solo Intercom device Finished in Black Steel

RFID Smart Card on 13.56Mhz frequency for use with Axis Helios IP range of Door Intercom devices fitted with internal or external smart card reader.The Axis Helios is a genuine and official Mifare RFID Card that is compatible to use for Axis Helios IP...

Internal RFID card reader for installation in Axis IP Force intercoms. Allows the use of EM4100 EM4102 and HID Proximity cards. Another two switches two logical inputs and a Wiegand interface are available. It is compatible with the Axis IP Force...

Flush mounted box for walls or plasterboard. Suitable for IP Solo

Flush mount box that is compatible to use for Axis Helios Force IP Intercom door controller and extender panels and can accommodate one module. This box is designed for indoor and outdoor the installation which is made on all metal construction. It is...