StarTech USB 3.1 External SSD/HDD Enclosure - 2.5in SATA - 10Gbps

This USB 3.1 external hard drive enclosure keeps your data protected in harsh environments. With data transfer speeds of up to 10Gbps, the enclosure gives you quick access to your data when youﾒre out in the field.   The 2.5" SATA hard drive enclosure supports both solid-state drives (SSD) and hard drives (HDD). It comes with a USB-C to USB-C cable and a USB-A to USB-C cable to support both USB-C and USB-A laptops and tablets.  Dustproof and Water Resistant  Be prepared for the unexpected. The SSD and HDD enclosure comes with an IP65 rating, which means that itﾒs both dustproof and water resistant.   Itﾒs the perfect solution for people who work outside. Or, for people who work in environments with a lot of dust, like: construction sites, factories, or manufacturing facilities.  Military-Rated Protection  The rugged hard drive enclosure is military rated (MIL-STD-810G) to protect your drive against drops, shock, and vibration.  The exterior casing provides shock resistance, while the flexible silicone sleeve provides extra protection, absorbing the impact of bumps, rough baggage handling or drops. Inside, an extra layer of silicone provides drive stability.  Faster Transfer Speeds with USB 3.1  The enclosure delivers USB 3.1 performance with data transfer speeds of up to 10Gbps. It lets you leverage the high performance of the latest drives and alleviates bottlenecks while transferring data.  S251BRU31C3 is backed by a StarTech.com 2-year warranty and free lifetime technical support. 

Hardware
Industry Standards	MIL-STD-810G, Method 503.5 (Thermal Shock) MIL-STD-810G, Method 514.6 (Vibration) MIL-STD-810G, Method 516.6 (Shock) MIL-STD-810G, Method 507.5 (Humidity) MIL-STD-810G, Method 509.5 (Salt Spray) MIL-STD-810G, Method 510.5, Procedure I (Sand and Dust) MIL-STD-810G, Method 508.6 (Fungus)
Interface	USB 3.1 Gen 2
Number of 2.5 inch bays	1
Number of Drives	1
Supported Drive Height(s)	7mm
	9.5mm
Indicators
LED Indicators	Diagnostic LED (Drive Power and Activity)
Packaging Information
Package Height	63 mm [2.5 in]
Package Length	13.5 cm [5.3 in]
Package Width	18 cm [7.1 in]
Shipping (Package) Weight	475 g [16.8 oz]
Performance
4Kn Support	Yes
Hot Swap Capability	No
Max Drive Capacity	Tested up to 2TB at 7200 RPM
Maximum Data Transfer Rate	10 Gbps
MTBF	48,000 hours
S.M.A.R.T. Support	Yes
TRIM Support	Yes
Type and Rate	SATA III (6 Gbps)
	USB 3.1 Gen 2 - 10 Gbit/s
UASP Support	Yes
Physical Characteristics
Color	Black
Material	Plastic
Max Drive Height	9.5 mm [0.4 in]
Product Height	3 cm [1.2 in]
Product Length	14.6 cm [5.7 in]
Product Width	11.2 cm [4.4 in]
Weight of Product	304 g [10.7 oz]
Power
Power Source	USB-Powered
Prominence
Description CDW 75 - 1st Line	StarTech.com USB 3.1 External Hard Drive Enclosure - 10Gbps - IP65 Rated
Software
OS Compatibility	OS independent; No software or drivers required
Special Notes / Requirements
Note	Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
What's in the Box
Included in Package	drive enclosure
Hardware
Fan(s)	No
Drive Size	2.5in
Drive Installation	Fixed
Compatible Drive Types	SATA
Chipset ID	ASMedia - ASM235CM
Bus Type	USB 3.1 Gen 2
Environmental
Storage Temperature	-40ﾰC to 85ﾰC (-40ﾰF to 185ﾰF)
Operating Temperature	-40ﾰC to 85ﾰC (-40ﾰF to 185ﾰF)
Humidity	20% ~ 95% RH
Connector(s)
Other Interface(s)	USB 3.1 USB Type-A (9 pin, Gen 2, 10 Gbps) Female
Host Connectors	USB Type-C (24 pin) USB 3.1 (10Gbps)
Drive Connectors	SATA Data & Power Combo (7+15 pin) Receptacle
What's in the Box
Included in Package	foam drive pad
	hex key
	quick-install guide
	USB-C to USB-A cable
	USB-C to USB-C cable