StarTech USB 3.0 universal HDD Dock - 2.5/3.5in SATA & IDE - UASP

The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray. Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details. The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables. A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase  the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives). The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

Connector(s)
Drive Connectors	IDE (40 Pin, EIDE/PATA) Male
	LP4 (4 pin; Large Drive Power) Male
	SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors	USB Type-B (9 pin) USB 3.0 Female
Environmental
Humidity	8% ~ 90% RH
Operating Temperature	5ﾰC to 80ﾰ (41ﾰF to 176ﾰF)
Storage Temperature	-40ﾰC to 70ﾰC (-40ﾰF to 158ﾰF)
Hardware
Chipset ID	JMicron - JMS561U JMicron - JMD330
Compatible Drive Types	SATA & IDE
Drive Installation	Removable
Drive Size	2.5in & 3.5in
Fan(s)	No
Interface	USB 3.0
Number of Drives	2
Indicators
LED Indicators	Power and Drive Activity
Packaging Information
Package Height	21.4 cm [8.4 in]
Package Length	18.7 cm [7.4 in]
Package Width	12.3 cm [4.8 in]
Shipping (Package) Weight	1.1 kg [2.4 lb]
Performance
Insertion Rating	15,000 Cycles (SATA)
Max Drive Capacity	Currently tested with up to 6TB 7200 RPM 3.5" hard drives and 2TB 5400 RPM 2.5" hard drive
Maximum Data Transfer Rate	5 Gbps
MTBF	30000 hours
RAID	No
Type and Rate	SATA III (6 Gbps)
	USB 3.0 - 5 Gbit/s
UASP Support	Yes
Physical Characteristics
Color	Black
Material	Plastic
Product Height	7 cm [2.8 in]
Product Length	14.7 cm [5.8 in]
Product Width	13 cm [5.1 in]
Weight of Product	552 g [19.5 oz]
Power
Center Tip Polarity	Positive
Input Current	1.3 A
Input Voltage	100 - 240 AC
Output Current	3 A
Output Voltage	12V DC
Plug Type	M
Power Consumption (In Watts)	36
Power Source	AC Adapter Included
Software
OS Compatibility	OS independent; No software or drivers required
What's in the Box
Included in Package	40 Pin + LP4 to 44 Pin IDE Cable
	IDE 40 to 40 Pin Cable
	Instruction Manual
	LP4 Power Cable
	Universal Hard Drive Dock
	Universal Power Adapter (NA/UK/EU/AUS)
	USB 3.0 Cable