No Surcharge Banner

StarTech 1-Port 10GbE network card with Intel Chip - PCI Express

Product ID:
177878
SKU:
ST10000SPEXI
Availability:
In Stock
Shipping:
Calculated in Cart or Checkout
  • Image for StarTech 1-Port 10GbE network card with Intel Chip - PCI Express AusPCMarket
  • StarTech 1-Port 10GbE network card with Intel Chip - PCI Express Product Image 2
  • StarTech 1-Port 10GbE network card with Intel Chip - PCI Express Product Image 3
  • StarTech 1-Port 10GbE network card with Intel Chip - PCI Express Product Image 4
MSRP: $673.00
$549.00 inc GST
— You save $124.00

Description

Hereメs a powerful and cost-effective solution for upgrading your server or workstation to 10 Gigabit Ethernet networking over copper. This PCI Express 10G NIC lets you add an Ethernet port to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G 1G and 100Mbps.  Reliable, high-performance connectivity This 10G network card utilizes the Intel® X550-AT chipset, delivering the power, performance and enhanced capabilities you need for dependable network connections. Compliant with IEEE 802.3u/ab/an standards, the 1-port 10G card delivers a dependable way to upgrade or replace your existing network port, providing throughput capability of up to 10Gbps in each direction (20Gbps total). It connects easily through a single, four-lane (x4 or higher) PCI Express slot. The Intel X550-AT chipset provides many advanced features including Intel® Virtualization Technology for connectivity and PXE network boot support. The Intel chipset provides many advanced features to support load-balancing the flow of network traffic, to enhance throughput and provide greater data reliability. It supports Audio-Video Bridging (AVB) to enable tightly controlled media stream synchronization, buffering and resource reservation. It also lets you take advantage of advanced features such as VLAN tagging, up to 15K jumbo frame support and Auto MDIX. Cost-effective and versatile multimode connectivity This five-speed NIC provides a cost-effective and versatile networking solution, by giving you the additional bandwidth your network needs without having to overhaul your infrastructure wiring. It lets you add an Ethernet port which can be accessed at multiple speeds 10G, 5G, 2.5G 1G and 100Mbps. Compatible with a broad range of operating systems, the 10G NIC is fully compliant with 10GBase-T and NBASE-T™ specifications. (10G network speeds require Cat6a cable. All other speeds require Cat5e cable.) The PCIe 10G network card features advanced NBASE-T technology, supporting the latest multigigabit equipment, including new Cisco® campus switches and Aruba Networks® access points. The card enables you to connect to NBASE-T based equipment at network speeds of 2.5Gbps or 5Gbps, over your existing Cat5e infrastructure, without having to upgrade to more expensive Cat6a. The Ethernet network card also supports the more common 10G over copper, and 1G network connections using existing Cat 6/Cat5e or better cabling. Easy installation With its dual-profile design, the network card is easy to install into a wide range of computer/server chassis, regardless of form factor. The card comes equipped with a full-sized bracket, and includes a low-profile/half-height installation bracket that you can use as needed. The ST10000SPEXI is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Connector(s)
Connector Type(s)PCI Express x4 Male
Internal PortsRJ-45 Female
Environmental
Humidity20~80%
Operating Temperature5ᄚC to 50ᄚC (41ᄚF to 122ᄚF)
Storage Temperature-20ᄚC to 60ᄚC (-4ᄚF to 140ᄚF)
Hardware
Bus TypePCI Express
Card TypeStandard Profile (LP bracket incl.)
Chipset IDIntel - X550AT
Industry StandardsIEEE 802.1Q VLAN Tagging
IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100BASE-T)
NBASE-T
IEEE 802.3x Full Duplex Flow Control
PCI Express Rev 2.0
InterfaceRJ45 (10 Gigabit Ethernet)
Port StyleIntegrated on Card
Ports1
Indicators
LED Indicators10G/1G Speed
Link/Activity
Packaging Information
Package Height40 mm [1.6 in]
Package Length20.9 cm [8.2 in]
Package Width14.5 cm [5.7 in]
Shipping (Package) Weight0.2 kg [0.4 lb]
Performance
Auto MDIXYes
Compatible Networks10 Gbps/5G/2.5G/1G/100 Mbps
Full Duplex SupportYes
Jumbo Frame Support9K max.
Maximum Data Transfer Rate10 Gbps
Promiscuous ModeYes
Supported ProtocolsIEEE 802.3x (Flow Control Support)
IEEE 802.1Q (VLAN tagging)
Physical Characteristics
Cable Length100 mm [3.9 in]
ColorBlack
Product Height12.1 cm [4.8 in]
Product Length15.2 cm [6 in]
Product Width68.5 mm [2.7 in]
Weight of Product96 g [3.4 oz]
Software
OS CompatibilityWindowsᆴ 7, 8, 8.1, 10
Windows Serverᆴ 2008 R2, 2012, 2012 R2, 2016, 2019
(Windows Drivers are supported in 64-bit only)
Linux 2.4.x to 4.11.x LTS Versions Only
ESXi 5.1/5.5/6.0
Special Notes / Requirements
System and Cable RequirementsFor Windows, NBase-T support requires Windows 8 or higher
What's in the Box
Included in Package10G network card
low-profile bracket
quick-start guide
View AllClose

Warranty Information

2 Year
View AllClose

Additional Information

productid:
177878
Availability:
In Stock
View AllClose