StarTech HDMI Over Fiber Extender (SC) w/ IR Control - 2600ft - 1080p

The ST121HDFXA is a long-range HDMI video extender kit that uses SC fiber optic cable to extend video/audio from an HDMI-equipped device to a remote display up to 2600 feet (800 Meters) away. The extender supports full High-Definition video (1920x1200 / 1080p) and includes both the transmitter and receiver, for a complete ready-to-use digital signage solution. Not only is this an incredibly long range solution that can extend an HDMI signal across or between buildings, but because fiber optics transmit data using light rather than copper, it will not cause or be effected by electromagnetic Interference (EMI). For convenient, time-saving control of the media source, the HDMI extender also offers Infrared (IR) extension, which enables you to control the HDMI audio-video source from either end of the connection. The kit also includes optional mounting hardware for a clean and professional installation. The ST121HDFXA HDMI over Fiber Optic Extender kit is TAA compliant and backed by a StarTech.com 2-year warranty with free lifetime technical support.

Connector(s)
Local Unit Connectors	Fiber Optic SC Duplex Female
	HDMI (19 pin) Female
	IrDA (Infrared, SIR/FIR) Female
Remote Unit Connectors	Fiber Optic SC Duplex Female
	HDMI (19 pin) Female
	IrDA (Infrared, SIR/FIR) Female
Environmental
Humidity	0-80%
Operating Temperature	0ﾰC to 40ﾰC (32ﾰF to 104ﾰF)
Storage Temperature	-10ﾰC to 60ﾰC (14ﾰF to 140ﾰF)
Hardware
Audio	Yes
Cabling	Fiber Optic
Daisy-Chain	No
Ports	1
Rack-Mountable	Yes
Packaging Information
Package Height	86 mm [3.4 in]
Package Length	30.1 cm [11.9 in]
Package Width	24.4 cm [9.6 in]
Shipping (Package) Weight	2 kg [4.4 lb]
Performance
Audio Specifications	Supports Dolbyﾮ TrueHD, DTS-HD MA
IR Interface	IR Interface: Bi-directional 38Khz / ﾱ10ﾰ / 5M
Max Distance	800 m / 2600 ft
Maximum Cable Length	792.5 m [2599.3 ft]
Maximum Data Transfer Rate	HDMIﾮ - 3.4Gbps
Maximum Digital Resolutions	1080p @ 60Hz, 48-bit
Supported Resolutions	50 / 125 Multimode cabling 800 m at 1080p 1200 m at 1080i 62.5 / 125 Multimode cabling 350 m at 1080p 450 m at 1080i
Wide Screen Supported	Yes
Physical Characteristics
Color	Black
Material	Steel
Product Height	2.6 cm [1 in]
Product Length	12.9 cm [5.1 in]
Product Width	97 mm [3.8 in]
Weight of Product	457 g [16.1 oz]
Power
Center Tip Polarity	Positive
Input Voltage	100 - 240 AC
Output Current	1.5A
Plug Type	M
Power Consumption (In Watts)	18
Power Source	2 AC Adapters Included
Special Notes / Requirements
Note	If your video source is HDCP encrypted, your connected display MUST be HDCP compliant. If the extender detects a non-HDCP compliant display while youﾒre extending an HDCP encrypted video source, the content will not display
System and Cable Requirements	Multi-mode fiber cabling (50/125 or 62.5/125) terminated with SC duplex connectors, is required to connect the transmitter to the receiver.
What's in the Box
Included in Package	7 ft [2.1 m] Multi-mode SC-SC duplex Fiber Optic cable
	Foot Pad Set
	IR Receiver Cable
	IR Transmitter Cable
	Local HDMIﾮ Extender Unit
	Mounting Brackets
	Remote HDMIﾮ Receiver Unit
	Universal Power Adapter NA / UK / EU
	User Manual