Kingston
Kingston ValueRAM 4GB (1x 4GB) DDR3 1600MHz Memory
- Product ID:
- 160085
- SKU:
- KVR16N11S8/4
- Availability:
- Out of Stock - Contact for ETA Use the above Product ID when contacting us
Kingston ValueRAM 4GB (1x 4GB) DDR3 1600MHz SODIMM Memory
Kingston
Kingston 4GB (1x 4GB) DDR3 1600MHz Memory
Kingston
Kingston ValueRAM 4GB (1x 4GB) DDR3 1333MHz Memory
Kingston
Kingston 4GB (1x 4GB) DDR3L 1600MHz Memory
Kingston
Kingston 4GB (1x 4GB) DDR3 1600MHz SODIMM Memory
Kingston
Description
DESCRIPTION
This document describes ValueRAM''s 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.
FEATURES
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 800MHz fCK for 1600Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address ì000î only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85degree, 3.9us at 85degree < TCASE < 95degree
- Asynchronous Reset
- PCB : Height 0.740” (18.75mm) or 1.180” (30.00mm)