Perfect for Harsh Environments
This industrial USB hub delivers reliable performance with a metal, heavy-duty housing. It supports wide-range 7-24V DC terminal block input, giving you the flexibility to power the hub as required, based on your own power input capabilities.
Perfect for factory environments, the rugged hub also supports a wide operating temperature range (0ﾰC to 70ﾰC) and offers surge and ESD protection to each USB port, which can help prevent damage to your connected devices.
Connect & Charge More USB Devices
Designed for a high volume of connections, this robust USB 3.0 hub offers ten connection ports, for connecting more USB devices and peripherals.
The hub also supports USB battery charging specification 1.2, delivering up to 2.4A on any port to a maximum of 50W total, so you can charge your mobile devices faster than traditional USB ports allow.
Locate the Hub Where You Need it Most
With versatile installation options, you can install the hub where itﾒs best suited for your environment. With built-in mounting brackets and included DIN mount rails, you can securely mount the USB 3.0 hub to most surfaces such as a wall, under a desk or rack.
StarTech.com offers an external power adapter, ITB20D3250, sold separately. The universal DC power adapter can be used as an alternative, back up or replacement power supply for StarTech.comﾒs line of industrial USB hubs.
Works With Your Older USB Devices
The rugged USB hub supports the full 5Gbps bandwidth of USB 3.0 and is backward compatible with previous USB devices. You can connect your legacy USB 3.0 and 1.x peripherals alongside your newer USB 3.0 devices without any disruptions.
The ST1030USBM is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|USB-C Device Port(s)||No|
|USB-C Host Connection||No|
|LED Indicators||Power (Green)|
|Package Height||57 mm [2.2 in]|
|Package Length||24.6 cm [9.7 in]|
|Package Width||16.9 cm [6.7 in]|
|Shipping (Package) Weight||587 g [20.7 oz]|
|Device Power Consumption (In Watts)||59 Watts|
|ESD Protection||+/-15kV (Air)|
|Maximum Data Transfer Rate||5 Gbps|
|Surge Protection||350W on the DFP and UFP|
|Total Available Power Output (In Watts)||ﾠ45 Watts|
|Type and Rate||USB 3.0 - 5 Gbit/s|
|Cable Length||2032 mm [80 in]|
|Product Height||3.1 cm [1.2 in]|
|Product Length||19.8 cm [7.8 in]|
|Product Width||56 mm [2.2 in]|
|Weight of Product||357 g [12.6 oz]|
|Input Voltage||7 ~ 24 DC|
|Power Source||Terminal Block|
|Description CDW 75 - 1st Line||StarTech.com 10-Port Industrial USB 3.0 Hub w/ ESD & 350W Surge Protection|
|OS Compatibility||OS Independent; No additional drivers or software required|
|Special Notes / Requirements|
|Note||If connected to a USB 2.0 host port, performance may be limited|
|This product is intended for use with terminal block power only ﾖ Standard AC adapter not available|
|System and Cable Requirements||Host computer with an available USB 3.0 port|
|What's in the Box|
|Included in Package||10-port industrial USB 3.0 hub|
|DIN rail mounting kit|
|Industry Standards||USB Battery Charging Specification Rev. 1.2|
|USB 3.0 - Backward compatible with USB 2.0/1.1|
|Chipset ID||Genesys Logic - GL3522|
|Bus Type||USB 3.0|
|Storage Temperature||-20ﾰC to 85ﾰC (-4ﾰF to 185ﾰF)|
|Operating Temperature||0ﾰC to 70ﾰC (32ﾰF to 158ﾰF)|
|Humidity||5%~95% RH (Non-condensing)|
|Connector Type(s)||USB Type-B (9 pin) USB 3.0 Female|
|USB Type-A (9 pin) USB 3.0 Female|
|Terminal Block (2 Wire)|
|What's in the Box|
|Included in Package||instruction manual|
|terminal block (2 wire)|
|USB 3.0 host cable|