APC SUVTP10KHS VT 10kVA 400V Sinewave Smart UPS

SKU:
SUVTP10KHS
Availability:
In Stock
Shipping:
Calculated at Checkout
$6,859.00

Description

FEATURES:

UPS is supplied without batteries. 3rd party battery system must be purchased separately

Includes: Bolt Down Brackets, CD with software, Installation Guide, Network Management Card, Power modules ship installed, Start up included, User Manual


Parallel-capacity capable:
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capable:
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy


Availability
Battery modules connected in parallel:
Delivers higher availability through redundant batteries.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Generator compatible:
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Scalable runtime:
Allows additional run time to be quickly added as needed.
Dual mains input:
Increases availability by allowing the UPS to be connected to two separate power sources.

Marketing Features
Hot-swappable batteries:
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Dual mains input:
Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime:
Allows additional run time to be quickly added as needed.
Input power factor correction:
Minimizes installation costs by enabling the use of smaller generators and cabling.
Network manageable:
Provides remote power management of the UPS over the network.
Manual maintenance bypass:
Reduces installation costs by eliminating the need for an external mechanical bypass.

Sustainability
EU CoC for UPS:
Ensures that UPSs sold in the EU are highly efficient

Protection
Cold-start capable:
Provides temporary battery power when the utility power is out.
Safety-agency approved:
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulation:
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Total Cost of Ownership
Manual maintenance bypass:
Reduces installation costs by eliminating the need for an external mechanical bypass.
Temperature-compensated battery charging:
Prolongs battery life by regulating the charge voltage according to battery temperature.
Input power factor correction:
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management:
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Manageability
Network manageable:
Provides remote power management of the UPS over the network.
LED status indicators:
Quickly understand unit and power status with visual indicators.
SmartSlot:
Customize UPS capabilities with management cards.
Programmable frequency:
Ensures compatibility with different input frequencies.
Audible alarms:
Provides notification of changing utility power and UPS power conditions
LCD display:
Alpha-Numeric Display which displays system parameters and alarms.
InfraStruXure Manager Compatible:
Enables centralized management via the APC InfraStruXure Manager.

Serviceability
Battery replacement without tools:
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Modular design:
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Automatic self-test:
Periodic battery self-test ensures early detection of a battery that needs to be replaced.


TECHNICAL SPECIFICATIONS:

Output
Output power capacity: 8.0 KWatts / 10.0 kVA
Max Configurable Power (Watts): 8.0 KWatts / 10.0 kVA
Nominal Output Voltage: 400V 3PH
Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load: 95.2 %
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal
Output Frequency (not synced): 50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages: 380, 415
Load Crest Factor: 3 : 1
Topology: Double Conversion Online
Waveform type: Sine wave
Maximum Output Current: 16
Output Connections:
(1) Hard Wire 4-wire (3PH + G) (Battery Backup)
(1) Screw Terminals (Battery Backup)
(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
Bypass: Built-in Maintenance Bypass, Built-in Static Bypass

Input
Nominal Input Voltage:
 400V 3PHInput frequency 47 - 70 Hz (auto sensing)
Input Connections: Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations: 304 - 477V
Efficiency at Full Load: 95.2 %
Other Input Voltages: 380, 415
Maximum Input Current: 14.0A
Input Power Factor at Full Load: 0.98

Batteries & Runtime
Battery type: No internal battery - uses external battery system
Extended Run Options: APC-Smart-UPS-VT-10kVA-400V-w-Start-Up-5X8-Internal-Maintenance-Bypass-Parallel-Capability

Communications & Management
Interface Port(s): DB-9 RS-232, Smart-Slot
Pre-Installed SmartSlot™ Cards: AP9631
Control panel: Multi-function LCD status and control console
Audible Alarm: Audible and visible alarms prioritized by severity
Emergency Power Off (EPO): Yes

Physical
Maximum Height: 823mm, 82.3cm
Maximum Width: 352mm, 35.2cm
Maximum Depth: 838mm, 83.8cm
Net Weight: 134.0kg
Shipping Weight: 173.0kg
Shipping Height: 1290mm, 129.0cm
Shipping Width: 720mm, 72.0cm
Shipping Depth: 1110mm, 111.0cm
Color: Black
Units per Pallet: 1.0

Environmental
Operating Environment: 0 - 40 °C
Operating Relative Humidity: 0 - 95 %
Operating Elevation: 0-999.9meters
Storage Temperature: -50 - 40 °C
Storage Relative Humidity: 0 - 95 %
Storage Elevation: 0-15000meters
Audible noise at 1 meter from surface of unit: 64.0dBA
Online thermal dissipation: 1774.0BTU/hr
Protection Class: IP 20

Conformance
Approvals: C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111
Standard warranty: 1 year repair or replace, Start-Up Service

View AllClose